Fluke 773

  • Fast Shipping

    Receive products in amazing time
  • Easy Returns

    Return policy that lets you shop at ease
  • Always Authentic

    We only sell 100% authentic products
  • Secure Shopping

    Your data is always protected

Highlights

Need more hours in your day? Save time by NOT breaking the loop on 4-20 mA signal measurements
Categories: ,

Description

Need more hours in your day? Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Features

• Best in class 0.2 % accuracy

• 0.01 mA resolution and sensitivity

• Measure 4 to 20 mA signals without ”breaking the loop”

• Measure mA signals for PLC and control system analog I/O

• Dual backlit display with both mA measurement and percent of 4 to 20 mA span

• Measurement Spotlight illuminates hard to see wires in dark enclosures

• Detachable clamp with extension cable for measurements in tight locations

• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range

• Automatically change the 4 to 20 mA output for remote testing

• Power saving features, auto-off, backlight timeout extend battery life

• Hold function captures and displays changing measurements

• Measure 4 to 20 mA signals with in-circuit measurement

• Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters

• Source 4 to 20 mA signals for testing control system I/O or I/Ps

• mA output linear ramp or 25% step output

• Automatically change the 4 to 20 mA output for remote testing

• DC voltage measurement to verify 24V power supplies or voltage I/O signals

• Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals

• Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp

• Enables milliamp signal logging to a separate logging device without breaking the loop

• Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop

• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal

• Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators

• Voltage output linear ramp or 25% step output

• Automatically change the voltage output for remote testing

Additional information

brand

Fluke

0.0/5
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Fluke 773”